板式冷卻器是汽車?yán)鋮s系統中最重要的組成部分，通常是由出水室、進水室以及主片與散熱器芯片共同組合而成的。板式冷卻器的結構簡單，且經濟高效，在性能方面也隨著時代的發展也在不斷的加強。在板式冷卻器的使用中，有時候會有不進水的狀況發生。
Plate cooler is the most important part of vehicle cooling system. It is usually composed of water outlet, inlet chamber, main chip and radiator chip. The structure of the plate cooler is simple, economical and efficient, and its performance is also strengthened with the development of the times. In the use of plate cooler, sometimes there will be no water.
有的時候并不是加不進去水，而是感覺并沒有加多少水，但是散熱器就已經顯示加水加滿，但是行車距離沒有多少的時候就又顯示缺水，也就是我們平時所說的“虛量”。
Sometimes it doesn't add water, but it doesn't feel much water. But the radiator has already shown that the water is full, but when the distance is not much, it also shows water shortage. That's what we usually call "virtual volume".
上述兩種情況大都是因為節溫器的原因造成的。正常情況下當我們加水的時候，節溫器閥門上的小孔是需要泄流的，但是如果這兩個小孔堵塞的話，就會出現氣體無法正常排出，進而導致冷水并沒有充滿水套的時候就顯示加滿，其實還是缺水的。
Most of the two cases are caused by the cause of the thermostat. Under normal circumstances, when we add water, small thermostat valve is required to discharge, but if the two hole jam, there will be a gas can not be properly discharged, resulting in cold water and no water jacket shows full fill, actually still water.
備案號：蘇ICP備17015414號-4 技術支持：
